|
|
|
|
Customers
Gamma
GenoPro version: 3.1.0.1
Last Login: Tuesday, June 11, 2024
Posts: 12,
Visits: 43
|
Thank you so much - that does make sense. I'll do as you suggest and report back. I hope this exchange has been useful to others struggling with the technical. 
|
|
|
|
|
Customers
Important Contributors
FamilyTrees.GenoPro.com
Translator
GenoPro version: 3.1.0.1
Last Login: Sunday, March 21, 2021
Posts: 716,
Visits: 12,927
|
Did some checking on your problem and it comes back to the path of the pictures (report and/or gno file)
When you make a report pictures are stored in a subfolder "pictures" and are accessed by the report pages properly, however when you open the Familytree.gno, which was created during the creation of the report, the picture path is what you have stated and this path does not match, thus you can`t see the pictures.
In your case it is advisable to put all the pictures right from the beginning in the folder which is normally created by the report generator (pictures) and specify this path in the gen file.
|
|
|
|
|
Customers
Gamma
GenoPro version: 3.1.0.1
Last Login: Tuesday, June 11, 2024
Posts: 12,
Visits: 43
|
No - sorry, I missed the \ It as you said C:\... I've put a few of the photos back - some stayed and some disappeared again. The ones that have stayed for 24 hours I've ticked the 'preserve full path' box. This could be a co-incidence. It's curious as GenoPro also resides in C:\ They only seem unstable on the genogram - they are all present on the generated report. I don't know if this sheds any light - I sent the genogram to a couple of relatives as a mail attachement - all was ok apart from the absent photos. Again, thanks for your interest.
|
|
|
|
|
Customers
Important Contributors
GenoPro version: 3.1.0.1
Last Login: 5 hours ago
Posts: 449,
Visits: 7,991
|
34018 (4/21/2007)
I definitely didn't move or rename anything and I've checked the path as you recommend - it is unchanged (C:documents and settings\my documents\my pictures\...). Is that an exact quote of the path? It should read: C:\documents and settings\my documents\my pictures\...
|
|
|
|
|
Customers
Gamma
GenoPro version: 3.1.0.1
Last Login: Tuesday, June 11, 2024
Posts: 12,
Visits: 43
|
I definitely didn't move or rename anything and I've checked the path as you recommend - it is unchanged (C:documents and settings\my documents\my pictures\...). I thought it might be to do with memory (58% free) so tried to attach another picture from the same source. It worked but the others are still missing. Have I had a visit from the picture fairy?  I appreciate your patience.
|
|
|
|
|
Customers
Important Contributors
FamilyTrees.GenoPro.com
Translator
GenoPro version: 3.1.0.1
Last Login: Sunday, March 21, 2021
Posts: 716,
Visits: 12,927
|
Your answer shows it is not what I thought it was.
Did you move or rename the folder with your pictures? Please check the path (Picture Location) of your pictures. You can Rename or Move pictures under the Menu item "Tools", not just one by one.
|
|
|
|
|
Customers
Gamma
GenoPro version: 3.1.0.1
Last Login: Tuesday, June 11, 2024
Posts: 12,
Visits: 43
|
 Thanks for your response. I'm not too sure what I'm doing here so probably haven't followed your instructions properly. I'm sure this is something really simple as all of my pictures have vanished overnight, not just the one. When I generate a report and go to 'show pictures' they are all there. They are missing when I click on a name in the basic genogram that I know has a picture attached. The red spot is still there too so I'm sure I haven't deleted any pics. Apologies for sounding so basic.
|
|
|
|
|
Customers
Important Contributors
FamilyTrees.GenoPro.com
Translator
GenoPro version: 3.1.0.1
Last Login: Sunday, March 21, 2021
Posts: 716,
Visits: 12,927
|
Not even the text box with the reference to the picture ID?
If the text box is there, check the pictureID in this box and look into the table layout under picture. If that ID is not there, you must have deleted that picture. The picture might be there, but under a different ID?
I had this before because I had deleted any reference to any other object. The report generator could not find that ID.
|
|
|
|
|
Customers
Gamma
GenoPro version: 3.1.0.1
Last Login: Tuesday, June 11, 2024
Posts: 12,
Visits: 43
|
I've added pictures to my genogram which was fine for about a week. Now they've gone - just a blank space The reference remains and nothing else has changed on my computer. I have Windows XP and Genopro 2007. Can someone advise please
|