|
|
|
|
Important Contributors
FamilyTrees.GenoPro.com
Customers
Translator
GenoPro version: 2.0.1.6
Last Login: Tuesday, December 16, 2008
Posts: 390,
Visits: 1,271
|
Similar to Maru-san topic, I also noticed that the picture name now appears under each picture. I also found the subject ennoying. Look at the screenshot below:  1) if Genopro decide to retain the display of the picture name, then my note/comment becomes redundant. 2) if Genopro decide not to show the picture name, then I have to retain my note/comment. Question: What is the Genopro intention for the display (or not) of the picture name? Depending on your reply, I suggest: Genopro to provide an option for the users, within the generator report window, to select or remove picture names from the report. Thank you.
Edited: Monday, June 19, 2006 by
GenoProSupport
|
|
|
|
|
Customers
Important Contributors
FamilyTrees.GenoPro.com
Translator
GenoPro version: 3.1.0.1
Last Login: Sunday, March 21, 2021
Posts: 716,
Visits: 12,927
|
|
|
|
|
|
Important Contributors
FamilyTrees.GenoPro.com
Customers
Translator
GenoPro version: 2.0.1.6
Last Login: Tuesday, December 16, 2008
Posts: 390,
Visits: 1,271
|
I'm not too sure what you mean.I also tried to change, in config.xml the parameter "fHidePictureDetails" from "N" to "Y" and didn't notice any display difference!
|
|
|
|
|
Customers
Important Contributors
FamilyTrees.GenoPro.com
Translator
GenoPro version: 3.1.0.1
Last Login: Sunday, March 21, 2021
Posts: 716,
Visits: 12,927
|
| PhPictureDetails T="[{?1|2|3}This picture[, '{0}',][ was taken{1}{2}][[{?1|2} and] sourced from {3}].][{?!1|2|3}[{?0}{!4} '{!0}']]" |
Have removed the bracket [, '{0}',] after picture and also the bracket at the end [{?!1|2|3}[{?0}{!4} '{!0}']], that`s all.
Edited: Monday, June 19, 2006 by
GenoProSupport
|
|
|
|
|
Administrators
Customers
Important Contributors
FamilyTrees.GenoPro.com
GenoPro version: 3.1.0.1
Last Login: 2 days ago @ 9:23 PM
Posts: 3,464,
Visits: 26,854
|
The report was 'enhanced' to include all details of each picture (i.e . date, place and source). It seemed inconsistent not to include the picture name with these details so it was included. A decision was taken that, since the report is a 'full English narrative', that all details should be included by default. It was intended that users wishing to exclude these details could set a Config.xml option ie. fHidePictureDetails which replaces fHidePictureName. However a bit of lax coding by myself caused this option not to be available! quite simply line 32 of Util.vbs should be
instead of
| g_fHidePictureDetailss = (Report.Parameters("fHidePictureDetailss") = "Y") |
Perhaps the root of this problem is that by default GenoPro sets the 'picture name' field to be the filename (excluding extension). Maybe it would be better if the picture name was left blank or perhaps an option was available to indicate whether or not the picture name should be set to the filename. GenoPro currently insists that a picture name is present, however a work-around is to set 'picture name' to a space character, thus ensuring no picture name is included on the report.
'lego audio video erro ergo disco' or "I read, I listen, I watch, I make mistakes, therefore I learn"
Edited: Sunday, July 2, 2006 by
GenoProSupport
|